P0300 Code: Random/Multiple Cylinder Misfire Detected

We may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.

Short answer

If your check engine light is flashing, reduce speed and load and get off the road as soon as it’s safe; if it’s steady, get the P0300 code checked promptly. To read the code yourself, our pick is the BlueDriver OBD2 Scanner. See the BlueDriver OBD2 Scanner at Amazon.

A P0300 code means your engine computer has detected misfires that move between cylinders, or hit several at once, rather than staying in one cylinder. The engine isn’t burning fuel properly in every cylinder, and that’s a problem you shouldn’t put off.

The short answer: if your check engine light is flashing, the EPA says a “catalyst-damaging misfire” is happening. Reduce speed and load, and get off the road as soon as it’s safe. If the light is steady, get the P0300 code checked promptly. The usual causes are worn spark plugs or coils, vacuum leaks and fuel delivery problems, but some cars have a known software or mechanical fix, so check your VIN for bulletins before you buy parts.

Jump to: Flashing light · What it means · Causes · How to fix it · A scanner · FAQ

Flashing light? Read this first

Treat a flashing check engine light with P0300 as urgent. The EPA’s OBD brochure says “a severe engine problem such as a catalyst-damaging misfire is occurring and should be addressed as soon as possible.” Identifix says to minimize driving until the severity of the misfire is known, citing EPA guidance to “avoid high-speed driving or excess weight.”

  • If the light is flashing: reduce speed and load, and get off the road as soon as it’s safe.
  • If you also have “severe vibration, raw-fuel odor, or substantial power loss,” Identifix says it “requires immediate attention.”
  • If the light is steady: get it checked promptly. RepairPal rates P0300 “Urgent.” Don’t ignore it.

For more on solid vs. flashing lights, see check engine light on? what it means and what to do.

What does the P0300 code mean?

P0300: Random/Multiple Cylinder Misfire Detected. That’s the generic wording used across code lists and by RepairPal. Honda’s bulletins call it “Random Misfire Detected,” and Nissan’s say “MULTI CYL MISFIRE.” (The original SAE J2012 text is paywalled.)

RepairPal says the code sets “when the engine control module (PCM) detects that one or more cylinders are not sufficiently contributing to keeping the engine running properly.”

P0301 to P0308 name a specific cylinder. If one shows up with P0300, Identifix says to start with that cylinder.

Symptoms

  • A check engine light that may flash during a severe misfire (RepairPal)
  • Rough running or idle, hesitation or jerking, lack of power, stalling and worse fuel economy (RepairPal)
  • A raw-fuel smell from the exhaust, vibration, or a hard start or no start (Identifix)

What causes a P0300 code?

  1. Worn spark plugs, plug wires or ignition coils. RepairPal lists ignition parts first.
  2. Incorrect ignition timing (RepairPal).
  3. Vacuum leaks (RepairPal).
  4. Fuel delivery: a weak pump, clogged filter, low pressure, plugged injectors or bad fuel (Identifix).
  5. Sensors and systems: EGR, mass airflow, crankshaft or camshaft position sensors, or the throttle position sensor (RepairPal).
  6. Mechanical problems: low compression, a head gasket or valves (RepairPal).
  7. Software or known faults. See the bulletins below.

RepairPal’s list of common misdiagnoses for P0300: “Fuel Injectors, Oxygen Sensor(s), Powertrain/Drivetrain problems.”

Known factory fixes for P0300

Check your VIN first. A service bulletin or warranty extension applies only to the vehicles it lists, often only certain model years, engines or build dates. It doesn’t mean every car of that model has the problem, or that yours does. Ask a dealer to run your VIN for open bulletins, recalls and warranty extensions before you buy parts.

  • Toyota T-SB-0156-19: “MIL ON With DTC P0300 and/or Cold Start Misfire,” some 2017–2020 86 with automatic transmissions. The fix is an engine computer calibration update. Read it on NHTSA.
  • Nissan NTB22-069: P0300 to P0306 on certain 2022 Pathfinder during cold-start warm-up, with no drivability complaint. The engine computer is reprogrammed if its part number matches. Read it on NHTSA.
  • Honda 23-026 (March 14, 2023): “Software Update DTC P0300, P0301, P0302, P0303, P0304, or P0172,” some 2018–2022 Accord 2.0L. Per Identifix, it includes an oil drain-and-refill and an idle relearn. Read it on NHTSA.
  • GM 15-06-01-002O (March 2023): “P0300 Set,” covering certain GM trucks, SUVs, Corvettes, 2016–2023 Camaros and 2016–2019 Cadillac CTS-Vs. Per Identifix, it applies to some 5.3L and 6.2L V8s with a collapsed or stuck Active Fuel Management (AFM) lifter or a bent pushrod. Read it on NHTSA.
  • Honda 22-002 (February 18, 2022): a fuel-injector warranty extension on certain 2015–2016 Fit with P0300 to P0304 and other codes, for “10 years from the original date of purchase or 150,000 miles, whichever comes first.” Many 2015–2016 Fits are now past the 10-year term; check your VIN. Read it on NHTSA.

How to diagnose P0300

What you can check yourself

  1. Read all stored and pending codes. A P0301 to P0308 code shows where to look. Note any lean or rich codes, like P0171, P0174 or P0172. See our P0171 guide.
  2. Save the freeze frame and note when the misfire happens: cold start, idle or under load (Identifix).
  3. Check misfire counts per cylinder, if your scanner app shows them. Support varies by app.
  4. Check battery and charging voltage. Identifix lists a weak battery as a possible factor.
  5. Check when the plugs were last changed against your owner’s manual interval.
  6. Try a coil swap. With a single-cylinder code, swap that coil with a neighbor’s. If the misfire moves with the coil, the coil is bad.
  7. Look for oil in the spark plug wells and cracked intake hoses.

What a shop does

Per Identifix, a shop compares fuel trims at idle and 2,500 rpm (to spot a vacuum leak), runs a smoke test, checks fuel pressure under load, balances injectors, runs compression and leak-down tests, checks crank and cam timing correlation, and checks your VIN for bulletins and software updates.

How to fix a P0300 code

The fix depends on the cause: spark plugs, coils or boots; a vacuum hose or intake gasket; a fuel pump or filter; an injector; a sensor; a software update under a bulletin; or a mechanical repair, such as lifters or a head gasket. After the repair, clear the code with a scanner and confirm no pending code comes back. Repair costs vary widely by cause, so get the diagnosis first.

A scanner to track down P0300

Any OBD2 scanner reads the code. For P0300, you’ll also want freeze frame and live data, and per-cylinder misfire counts if your app supports them. These are the three picks from our best Bluetooth OBD2 scanner guide:

We may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.

  • Best overall: BlueDriver OBD2 Scanner (Bluetooth). Car and Driver’s Best Bluetooth Scanner in its 2026 test. Its listed features include live data, freeze frame, smog readiness and Mode 6, with no subscription.

    Where to buy: Check price at Amazon · Check price at Walmart · Check price at BlueDriver

  • For enthusiasts: OBDLink MX+. Works with iOS, Android and Windows, adds MS-CAN and SW-CAN for Ford and GM, and pairs with apps like FORScan. Check the current price at Amazon.
  • Budget: Veepeak OBDCheck BLE. A small ELM327 adapter that works with third-party apps. Check the current price at Amazon.

We haven’t confirmed per-cylinder misfire counts on any of these. It depends on your car and the app.

How we built this guide

We did not diagnose any cars for this guide. Mike re-read every source on November 17, 2026: RepairPal, Identifix’s P0300 guide (updated October 21, 2026), the EPA’s OBD brochure (from 2002, in the EPA’s archive), and the manufacturer bulletins on NHTSA linked above.

More in this topic: Car tech start-here guide.

For our full process, see how we choose the gear we recommend.

FAQ

Can I drive with a P0300 code?

If the light is flashing, reduce speed and load and get off the road as soon as it’s safe. The EPA calls it a “catalyst-damaging misfire.” If the light is steady and the car runs normally, drive gently and get it checked promptly.

I replaced the spark plugs and coils, and it still says P0300. What now?

Look beyond ignition parts. In one r/MechanicAdvice thread (an unconfirmed owner account), a 2006 LaCrosse still threw P0300 and kept misfiring after a shop replaced its spark plugs and ignition coil. A shop can check fuel trims, run a smoke test, test fuel pressure and run a compression test.

Can P0300 damage my catalytic converter?

Yes. The EPA describes a flashing light as a “catalyst-damaging misfire.” Fix misfires before you chase a P0420 catalyst code.

Is P0300 on my Silverado or Tahoe the AFM lifters?

It can be. GM bulletin 15-06-01-002O covers P0300 on certain 5.3L and 6.2L V8s with AFM lifter faults, per Identifix. Have a dealer check your VIN; the bulletin doesn’t cover every truck.

What’s the difference between P0300 and P0301?

P0300 means random or multiple cylinders. P0301 to P0308 name a single cylinder, which makes the problem easier to find.

Related codes

Misfires often show up with P0171 (system too lean). For EVAP codes, see P0442 and P0455.

Leave a Comment