We may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.
Short answer
For most people, the fix is a USB-C PD car charger with at least 40W on one port, and our top pick for wired charging is the Anker Nano Car Charger (167.5W, 3 ports). See the Anker Nano Car Charger at Amazon.
If your phone is charging slowly in the car, the cause is usually the car’s built-in USB port or a USB-A cable. Most factory ports deliver far less power than a modern phone can take, and Apple says an iPhone 15 or later charges at no more than 7.5W from any USB-A charger.
The fix for most people is a USB-C PD charger in the 12V socket with at least 40W on one port, plus a USB-C to USB-C cable. If you charge on a wireless mount, use the adapter the mount’s maker specifies to reach 25W: Apple says 30W or more for its MagSafe Charger, and Anker asks for 45W or more for its Prime 25W mount.
Below is a 60-second check to find your cause, the seven common causes with a fix for each, and the charger and mount we recommend. The phone requirements come from Apple, Samsung and Google’s own support pages.
Jump to: The 60-second check · How many watts · The 7 causes · What to buy · FAQ
Why is my phone charging slowly in the car? The 60-second check
- Look for a warning. On iOS 18 or later, check Settings > Battery for a “Slow Charger” note. iOS 26 can also show “Incompatible Charger.”
- Check the plug. Is the cable USB-A at the car end? Then an iPhone 15 or later gets 7.5W at most.
- Swap the cable. Try a known-good USB-C to USB-C cable rated 60W or more.
- Try the 12V socket. Plug a USB-C PD charger into the socket instead of the car’s USB port. If charging speeds up, the port was the problem.
- Cut the load. Close navigation or video, dim the screen, aim the AC at the phone, and get it out of direct sun.
- On a wireless mount: make sure the adapter feeding it is 30W or more for a 25W mount, unplug any wired accessory from the phone, and remove a thick case.
- Engine off? If the socket goes dead when the car is off, that’s normal in many cars.
How many watts your car gives vs what your phone needs
| Power source or phone | Figure | Source |
|---|---|---|
| Basic USB charging port (BC 1.2 standard) | A phone may draw up to 1.5A, about 7.5W at 5V | USB-IF Battery Charging 1.2 spec (Table 5-2) |
| iPhone 15 or later on any USB-A charger | 7.5W maximum | Apple |
| iPhone 17, 17 Pro, 17 Pro Max | 40W or more USB-C PD for 50% in about 20 minutes | Apple |
| iPhone 17e, iPhone Air | 20W or more for 50% in about 30 minutes | Apple |
| iPhone 18 Pro, 18 Pro Max | Top speed needs a USB PD 3.1 charger with AVS and a 60W-capable cable | Apple |
| iPhone 16 and earlier | 20W USB-C PD | Apple |
| Samsung Super Fast Charging | 25W needs USB PD with PPS; 45W needs a 45W PD/PPS charger and a 5A cable (SamMobile says the S25+ and S25 Ultra manage 45W on their 3A cable) | Samsung; SamMobile |
| Google Pixel | 30W USB-C PPS charger for 50% in about 30 minutes | |
| Wireless charging (older Qi pads) | Under 10W counts as slow | Apple |
The gap is obvious: a basic car port supplies a fraction of what a current phone can use.
The 7 causes, and how to fix each one
1. The car’s USB port is underpowered
Apple puts it plainly: “Charge ports in USB hubs or cars might charge slower than a dedicated USB-C charger.” Many factory ports were designed for data and basic charging, not fast charging.
Fix: use a USB-C PD charger in the 12V socket, with at least 40W on one port for a recent iPhone.
2. You’re using a USB-A cable or charger
“With a USB-A charger, iPhone 15 models and later will charge at a maximum of 7.5W,” Apple says. Google also says USB-A to USB-C charges more slowly than USB-C to USB-C.
Fix: switch to a USB-C port and a USB-C to USB-C cable.
3. The charger doesn’t speak your phone’s fast-charge protocol
iPhones fast-charge over USB Power Delivery (PD). Samsung’s Super Fast Charging needs PD with PPS, and Pixels want PPS too. A charger without PPS will charge a Galaxy or Pixel, just more slowly.
Fix: buy a USB-C charger that lists PD for iPhone, or PD with PPS for Samsung and Pixel.
4. The cable can’t carry the power
Samsung’s 45W charging needs a 5A cable, and Apple’s top iPhone speeds use a 60W-capable cable. Cheap or worn cables are a common bottleneck.
Fix: use a certified USB-C cable rated 60W or more, or 100W (5A) if you also charge a laptop.
5. The phone is too hot (or too cold)
Apple says an iPhone may put charging on hold when it’s hot and resume when it cools. On MagSafe and Qi chargers, iPhone may limit charging above 80% when the battery is warm. Navigation plus windshield sun is the classic summer case.
Fix: move the phone out of direct sun, point the AC at it, and use a mount with active cooling if you charge wirelessly.
6. CarPlay, Android Auto or heavy apps are using the power
Apple says graphics-heavy apps, the camera, and streaming video at full brightness slow charging. On a car’s CarPlay or Android Auto data port, navigation, a lit screen and streaming can use about as much power as the port supplies, so the battery barely moves. Owners of a Golf GTI, an Ioniq 5 and a Kia Niro describe the same thing on Reddit (owner reports, unconfirmed).
Fix: charge from a separate 12V USB-C PD charger. If you want CarPlay without the cable, a wireless CarPlay adapter can take the data port while the phone charges from the PD charger.
7. Wireless charging limits
- Older Qi pads under 10W are slow, according to Apple.
- Plugging a wired accessory into an iPhone while it charges on MagSafe caps its speed, as low as 7.5W on some models (Apple).
- A 25W MagSafe or Qi2.2 mount needs a 30W or stronger adapter feeding it (Apple). The usual trap is a 25W mount plugged into a weak car USB port.
Fix: feed the mount from a 30W+ USB-C PD charger, and use a cooled Qi2.2 mount if your phone supports 25W.
One more: multi-port chargers split their power. Apple notes output drops when several ports are in use, so check the per-port figure, not the total on the box.
We may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.
The fix: what to buy
For wired charging, our top pick is the Anker Nano Car Charger (167.5W, 3 ports). It’s WIRED’s best overall, and its 45W and 100W USB-C ports cover every current iPhone. Anker doesn’t list PPS, so check that before you rely on it for Samsung Super Fast Charging.
Where to buy: Check price at Amazon · Check price at Walmart · Check price at Target
For wireless charging on a mount, our top pick is the ESR OmniLock Qi2.2 25W with CryoBoost. It delivered the most power in MobileReviews Eh!’s 11-mount bench test and ran the coolest of the mounts that charged the iPhone, and the reviewer says it comes with a car adapter strong enough for 25W.
Where to buy: Check price at Amazon · Check price at Walmart · Check price at ESR
We did not test these ourselves; the picks come from the independent tests named above.
More in this topic: Car tech start-here guide.
FAQ
How many watts does a car USB port give?
Often not many. Under the BC 1.2 charging standard, a phone may draw up to 1.5A from a basic USB charging port, about 7.5W at 5V. A recent iPhone can take 40W or more.
Why does my phone lose charge on CarPlay?
Navigation, a bright screen and streaming can use about as much power as the car’s data port supplies. Charge from a 12V USB-C PD charger instead.
Is wireless charging slower than wired?
Usually. Older Qi pads under 10W are slow. A Qi2.2 mount can reach 25W on supported phones, but only with a 30W or stronger adapter feeding it, and heat often slows it down.
Will a 12V charger work with the engine off?
It depends on your car. Many cut power to the socket when the car is off, which is why plug-in dash cams stop recording when you park (our how to choose a dash cam guide covers that). If your socket stays live, unplug the charger when the car will sit, so it can’t drain the battery.
What charger do I need for an iPhone 17 or 18?
A USB-C PD charger with 40W or more on one port. For the iPhone 18 Pro’s very top speed, Apple specifies USB PD 3.1 with AVS and a 60W-capable cable.
Why does my Samsung say it isn’t fast charging in the car?
Samsung’s Super Fast Charging needs USB PD with PPS. Many car chargers and almost all factory USB ports don’t offer it.
Sources
We checked Apple’s iPhone charge speeds, fast charging and MagSafe charger pages on November 17, 2026. Samsung and Google figures come from their support and Pixel spec pages, plus SamMobile, checked the same day. The BC 1.2 figure comes from the USB-IF Battery Charging 1.2 spec (Table 5-2), checked November 19, 2026. Owner reports come from Reddit threads in car-brand communities and are individual experiences, not tests.
For our full process, see how we choose the gear we recommend.
Mike is the byline for The Car Gear Guide’s research team. We read independent tests, maker specs and fit guides, then turn them into plain-English buying guides for US drivers. We don’t hand-test the products we recommend. Guides are researched and drafted with AI tools, then fact-checked and edited before they go up.